Manage Hot Spare System - HIKVISION DS-7764NI-M4 User Manual

Steps
1. Go to System → Hot Spare .
2. Set Work Mode as Hot Spare Mode.
3. Click Apply.
4. Click Yes in the pop-up. Your device will restart automatically.
Note
The camera connection will be disabled when the device works in hot spare mode.
●
It is highly recommended to restore the device defaults after switching the work mode of hot
●
spare devices to normal mode to ensure the normal operation afterward.

12.3 Manage Hot Spare System

Steps
Note
Up to 32 working devices and 32 hot spare devices are allowed in the hot spare system.
●
Only one hot spare device can add working devices and other hot spare devices. You can find the
●
hot spare device IP address from working devices.
1. Go to System → Hot Spare through the hot spare device.
2. Click Add in Working Device Settings to add working devices to the hot spare system.
After refreshing the interface, you can view the working status of working devices from the hot
spare device interface. Also, the working status and IP address of the hot spare device can be
viewed from working device interface.
Network Video Recorder User Manual
Figure 12-3 Hot Spare
Figure 12-4 Add Working Device
109