Configure Disk Clone - HIKVISION DS-7764NI-M4 User Manual

Network Video Recorder User Manual
Figure 16-8 Health Detection
2. Click a HDD to view details.

16.6.4 Configure Disk Clone

Select the HDDs to clone to the eSATA HDD.
Before You Start
Connect an eSATA disk to the device.
Steps
1. Go to Maintenance → HDD Operation → HDD Clone .
Figure 16-9 HDD Clone
2. Check the HDD to clone. The capacity of the selected HDD must match the capacity of the clone
destination.
3. Click Clone.
4. Click Yes on the pop up message box to create the clone.
144