FISCHER PRO-LINE DE90 Operating Manual page 55

FISCHER Mess- und Regeltechnik GmbH
5.5.1.3.2 Characteristic C1 (Table)
5.5.1.3.2.1 Table C1
BA_EN_DE90
Directory: \Configuration\Channel 1\Characteristic C1
Level: 3
\...\...\Characteristic C1
1
Fig. 70: Characteristic C1 (table)
Menu name
Displ.range C1 unit
Table C1
Back
The table function can be used to correct the input characteristic of the sensor
at any point. The changes impact on the display value and the output signal.
Directory: \Parametrierung\Kanal1\Kennlinie K1\Tabelle K1
Level: 4
\...\...\...\Table C1
1
Fig. 71: Table C1
Menu name
No. Value pairs
Input value 1
Display value 1
Input value 2
Display value 2
Input value 30
Display value 30
Displ.range C1 unit
Table C1
Back
2 3 4
Description
A unit for the display value is defined
with this parameter. It must have a
length of at least 5 characters.
A
The table is defined in this menu.
E
This represents the output (exit) of the
menu. It is used to return to the Chan-
nel 1 menu.
Disp. Value pairs
Input value 1
Display value 1
Input value 2
2 3 4
Description
This parameter is used to define the
number of value pairs.
Value range: ... 2 ... 30
Value pair 1
Value pair 2
Value pair 30
Operation | 5
U
A
E
U
55