8 | Order codes
104
Parameterization:
[16]
Default setting
0
'Standard' configuration
1
'Linear characteristic curve' configuration
2
'Flow rate' configuration
3
'Table' configuration
4
'Volume flow' configuration with K-factor
5
'Equation' configuration
6
'Dynamic filter monitoring' configuration
7
'Difference' configuration
Z
'Customer-specific' configuration
*)
The configuration can be changed on the device at any time. The delivery
condition is defined by the order code. For more information about this, please
refer to the operating instructions.
FISCHER Mess- und Regeltechnik GmbH
*)
BA_EN_DE90