About this manual
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
PREFACE
This manual is written primarily for system engineers who will integrate the Procelerant
CE915GM COM Express™ embedded computing module into their own products.
See the following resources for information on the CE915GM modules not described in
this manual:
• Installation and initial setup instructions. the Procelerant CE915GM COM Express
Module Quick Start Guide provides the steps for assembling a COM Express system.
When referenced in this manual, the simplified name of Quick Start Guide will be
used.
• BIOS configuration information. The Procelerant CE915GMA BIOS Setup Utility
Specification describes the BIOS setup utility interfaces and configuration options.
When referenced in this manual, the simplified name of BIOS Setup Utility
Specification will be used.
• Carrier design guidelines and thermal validation procedures. The Procelerant
CE915GM COM Express Carrier Board Design Guidelines describes specific
considerations and guidelines for designing a carrier board to use with the COM
Express module.
When referenced in this manual, the simplified name of Carrier Board Design
Guidelines will be used.
• Qualified memory list. The CE915GMA Qualified Memory List provides the memory
modules RadiSys
has validated for use with COM Express modules.
®
When referenced in this manual, the simplified name of Qualified Memory List will be
used.
• Firmware and software update information. BIOS and driver updates may be
available for the COM Express module from time to time. Detailed procedures on
updating the firmware and software are included in the corresponding release
packages.
®
7