Passive Heatsinks; Product Package Components - RadiSys PROCELERANT CE915GMA Product Manual

Passive heatsinks

Product package components

Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
The CE-PHSA and CE-PHS17A passive heatsinks differ only in the height of the aluminium
heatsink. See dimensions in the sections below.
• CE-PHS: for CE915GM modules in a minimum 1U chassis. An airflow of 300lfm [1.5m/
sec] is required by the chassis fan.
• CE-PHS17A: For CE373A and CE738A models in a 6HP (ATCA) blade. An airflow of 400
lfm [2m/sec] is required for adequate cooling.
CE-PHSA
package contents
Product code Description
Backer plate 41x36mm, sheet metal (supplied with four M2 flat head screws)
CE-PHSA Aluminum passive heatsink, 125x94x27mm, 12V input
Carrier screws M2.5 x 0.45 x 4 mm, pan head (used to tighten the carrier board and module)
Heatsink screws M2.5 x 0.45 x16mm, pan head (used to tighten the heatsink and module)
Heatsink spacer M2.5 clear, 4.5mm outside diameter, 6 mm long
Module screw M2.5 x 0.45 x 12 mm, pan head (used with the heatsink spacer)
Standoffs M2.5 x 0.45 x 5mm, hex jam, 4.5 mm outside diameter
Washers 2.5mm inside diameter, spring lock (used with heatsink screws)
CE-PHS17A
package contents
Product code Description
Backer plate 41x36mm, sheet metal (supplied with four M2 flat head screws)
CE-PHS17A Aluminum passive fansink, 125x95x17mm, 12V input
Carrier screws M2.5 x 0.45 x 4 mm, pan head (used to tighten the carrier board and module)
Heatsink screws M2.5 x 0.45 x16mm, pan head (used to tighten the heatsink and module)
Heatsink spacer M2.5 clear, 4.5mm outside diameter, 6 mm long
Module screw M2.5 x 0.45 x 12 mm, pan head (used with the heatsink spacer)
Standoffs M2.5 x 0.45 x 5mm, hex jam, 4.5 mm outside diameter
Washers 2.5mm inside diameter, spring lock (used with heatsink screws)
4
Passive heatsinks
QTY
1
1
5
5
1
1
5
5
QTY
1
1
5
5
1
1
5
5
39