Table of Contents
Advertisement
5�3�13 End plate (E6)
Table 12: Internal functions
Position
End plate E6 is only installed together with connecting plate C2 or C4.
Application
Internal function
Pressure reducing valve
line X and supplies this line with the flow from the block-internal line P.
Pressure reducing valve control coil
the pressure reduction function.
Operation / control
The E6 end plate without control coil (pressure reducing valve) is not equipped
with manual operating elements or external control functions.
The version with control coil (pressure reducing valve), the pressure reduction
function can be activated by energizing the control coil.
This way, the pressure in the block-internal EHS pilot oil line X is increased to the
pressure value of the pressure reduction function.
If the control coil is not energized, the block-internal EHS pilot oil line X is
unloaded to the return flow.
Fluid plan
End plate E6 with pressure reducing valve
About these products | Load-sensing control block SB11
Designation
Pressure reducing valve
Switching coil pressure reducing valve
R Y
P X
Rx
: Limits the pressure in the block-internal EHS pilot oil
: Electrical activation and deactivation of
RE 66177-B/2022-05-03, Bosch Rexroth AG
31/60
Information
optional
optional
Advertisement
Table of Contents
