Disposal - Bosch Rexroth SB11 Instruction Manual

54/60 Load-sensing control block SB11 | Disposal
Bosch Rexroth AG, RE 66177-B/2022-05-03

12 Disposal

Spring-loaded components
Risk of injury due to ejected components during disassembly of the valve into its
individual parts!
▶ Loosen screwed-in and spring-loaded components slowly and keep secured
until the compression spring is relieved.
Careless disposal of the control block/control block segment, the hydraulic fluid
and the packaging material may lead to environmental pollution!
For disposal of the control block/control block segment, observe the following
points:
1� Drain the control block/control block segment completely.
2� Dispose of the control block/control block segment and the packaging material
in accordance with the national regulations of your country.
3� Dispose of the hydraulic fluid in accordance with the regulations of your
country.
4� Disassemble the control block/control block segment into its individual parts
and recycle them.
5� For example, separate the parts into:
– Metals
– Electronic waste
– Plastic
CAUTION