ctrlX CORE
X3
plus
5
Spare parts, accessories and wear parts
5.1
Power connector, 24 V
Ordering code
XACC-1-CSPWRM
5.2
SD card
Ordering code
XACC-0-SD016GB
5.3
RJ45 cable
Ordering code
RKB0020
5.4
End clamp
Ordering code
SUP-M01-ENDHALTER
5.5
Endcover
Ordering code
XACC-2-ENDCOVR
5.6
License dongle
The license dongle allows to easily transmit licenses between ctrlX controls. The license dongle is a
micro SD card with a serial number. The user can assign licenses to the dongle instead of to the ctrlX
controls.
Ordering code
XACC-1-SD*000L
5.7
Wear parts
The physical read-only memory (eMMC) of the control has a limited number of write cycles. Retrieve the
current status of the read-only memory via the ctrlX CORE web interface:
Settings Information tab "Resources" Sensors" .
Notes on sensor values:
•
"0 - 10% of eMMC life time used" means that up to 10 % of the maximum write cycles can be used.
•
Create a backup if the value exceeds 80%.
R911420136, Edition 01
Part number
Description
R911416670
24 V power connector
Part number
Description
R911404022
Micro SD card, 16 GB
Part number
Description
R911340676
Bus cable
Part number
Description
R911170685
2 pieces of snap-on end brackets for 35 mm NS
35/7.5 support rail; width: 9.5 mm
Part number
Description
R911412178
Endcover
Part number
Description
R911416693
License dongle
11 / 46
Wear parts
"ctrlX CORE side navigation
Bosch Rexroth AG