Table of Contents
Advertisement
16/60
Load-sensing control block SB11 | General instructions on property damage and product damage
Bosch Rexroth AG, RE 66177-B/2022-05-03
Danger from chemical or corrosive environmental conditions!
Product can be damaged! If the control block/control block segment is exposed
to chemical or aggressive environmental conditions, corrosion and even
malfunctions may occur. Leaks may lead to leakage of hydraulic fluid.
▶ Take suitable measures for protection of the control block/control block
segment against chemical and aggressive environmental conditions.
Escaping hydraulic fluid!
Risk of environmental pollution and contamination of ground water!
▶ When filling and draining hydraulic fluid, always place a drip tray under the
control block/control block segment.
▶ Use a suitable binding agent to collect any leaked hydraulic fluid.
▶ Observe the parameters in the safety data sheet for the hydraulic fluid and the
specifications provided by the machine/system manufacturer.
Danger from hot components!
Nearby products can be damaged! Components which heat up (e.g., solenoids)
can cause damage to nearby products if they are too close during installation.
▶ When installing the control block/control block segment, check the distances
to nearby products to prevent any damage.
The warranty exclusively applies to the delivered configuration.
The warranty claim becomes void with
• Faulty installation, commissioning and operation,
• Improper use,
• Removal of the tamper-proof caps and seals (e.g. with pressure settings),
• Control of the settings at the factory,
• Unauthorized conversions and additional installations,
• Opening of the directional valve,
• Improper handling,
• Use of non-original spare parts by Rexroth.
NOTICE
Advertisement
Table of Contents
