Table of Contents
Advertisement
10/60
Load-sensing control block SB11 | Safety instructions
Bosch Rexroth AG, RE 66177-B/2022-05-03
2�3 Improper use
Any use other than that described as intended use is considered improper.
Bosch Rexroth AG is not liable for damage resulting from improper use.
The user is solely responsible for any risks arising from improper use.
The following foreseeable forms of faulty usage are also considered improper
(this list is not exhaustive):
• Use outside the operating parameters approved in the data sheet and in the order
confirmation (unless specifically approved by the customer)
• Use of non-approved fluids, e.g. water or polyurethane components
• Application of the control block/control block segment in potentially explosive
environments
2�4 Personnel qualifications
The activities described in this documentation require a basic understanding of
mechanics, electrics and hydraulics, as well as familiarity with associated technical
terms. For transporting and handling the product, knowledge regarding the use
of lifting devices and lifting accessories is required. Skilled personnel refers
to persons who possess the professional training, knowledge and experience,
as well as the understanding of the regulations relevant to the work to be done
that are necessary to recognize possible dangers and take the appropriate safety
measures. Skilled personnel must follow the rules relevant to their field and have
the necessary hydraulic expert knowledge.
Hydraulic expert knowledge includes:
• Being able to read and fully understand hydraulic circuit diagrams and
• Knowledge regarding the function and interaction of hydraulic components.
Bosch Rexroth offers you measures supporting training in specific areas.
For an overview of the training contents, visit our website under:
www.boschrexroth.com/training.
2�5 General safety instructions
• Observe applicable accident prevention and environmental protection
regulations.
• Observe the safety regulations of the country in which the product is used/
operated.
• For Germany, the following applies: Hydraulic machinery/systems are
"facilities for handling substances hazardous to water in accordance with the
German Federal Water Act (WHG)". Sections 1 and 19 WHG (§19g, 19i, 19l)
in particular must be complied with in this respect.
• Use Rexroth products only when they are in good working order.
• Do not install, operate, disassemble or maintain Rexroth products if under the
influence of alcohol, drugs or medication that may affect your reaction time.
• Only use genuine Rexroth accessories and spare parts to ensure there is no
hazard to persons from unsuitable spare parts.
• Observe the technical data and ambient conditions specified in the product
documentation.
Advertisement
Table of Contents
