Siemens SIMATIC RF185C Operating Instructions Manual page 88

Configuring with the WBM
7.3 The menu items of the WBM
The "PLC" tab
The "PLC" tab is divided into the following area:
• PLC basic settings
Figure 7-8 The "Settings - Communication" menu item, "PLC" tab
PLC basic settings
In the "PLC basic settings" area, you can define which interfaces may be used for
communication with the controller.
Table 7- 15
Parameter
PROFINET IO interface
EtherNet/IP interface
88
Description of the PLC basic parameters
Description
In this area, you can define whether the communications module may be
accessed via the controller (STEP 7). With this setting, the Ethernet
interface is closed for communication with the controller.
In this area, you can specify whether access to the communications
module via EtherNet/IP is allowed. With this setting, the Ethernet
interface is closed for EtherNet/IP communication with the controller.
SIMATIC RF185C, RF186C, RF188C, RF186CI, RF188CI
Operating Instructions, 03/2022, C79000-G8976-C512-04