Siemens SIMATIC RF185C Operating Instructions Manual page 95

Figure 7-11 The menu item "Diagnostics - Hardware diagnostics"
Basic settings
In this area, you can use the "Reader interfaces" parameter to specify the reader for which a
firmware update is to be performed or which read point should undergo diagnostics.
Monitoring status
In this area you can update the reader and transponder parameters and reset error counters
of the reader.
Select the "Automatic cyclic update" check box to have the parameter values updated
automatically and cyclically.
The date and time of the last acknowledgment refers to the date and time of the connected
PC.
Status
The following parameters are read and displayed:
Table 7- 21
Displayed parameters
Hardware type
Hardware version
Bootloader version
Firmware version
Driver type
SIMATIC RF185C, RF186C, RF188C, RF186CI, RF188CI
Operating Instructions, 03/2022, C79000-G8976-C512-04
Displayed parameters of the "Reader status" area
Description
Hardware type of the reader
Hardware version of the reader
Bootloader version of the reader
Firmware version of the reader
Driver type of the serial interface of the reader
Configuring with the WBM
7.3 The menu items of the WBM
95