Siemens SIMATIC RF185C Operating Instructions Manual page 79

The "Transponder type" parameter
Selection of the transponders used. The selection depends on the value specified in the
parameter "Ident device / system". The following transponder types can be selected:
Ident device / system
RF290R
RF300 general
RF380R
RF300 Gen 2 general
RF380R Gen 2
RF300, MOBY E
ISO 15693
SIMATIC RF185C, RF186C, RF188C, RF186CI, RF188CI
Operating Instructions, 03/2022, C79000-G8976-C512-04
Value (transponder types)
ISO 15693
MDS D3xx, Infineon
RF300
ISO 15693 General
MDS D1xx, NXP
MDS D2xx, TI
MDS D261, STM
MDS D3xx, Infineon
MDS D4xx, Fujitsu - 2 KB
RF300
MOBY E
RF300, MOBY E
None
ISO 15693 General
MDS D1xx, NXP
MDS D2xx, TI
MDS D261, STM
MDS D3xx, Infineon
MDS D4xx, Fujitsu - 2 KB
MDS D5xx, Fujitsu - 8 KB
Configuring with the WBM
7.3 The menu items of the WBM
79