FORMAT THE USB PEN DRIVE
On the homepage, tap
1
Insert the USB pen drive in one of the two USB ports.
2
Tap
.
3
Tap
to confirm: all data will be erased.
4
Notice: Formatting erases all data from the pen drive. Be sure you
have already saved your data on a safe support before formatting.
Standby mode
DESCRIPTION
When in Standby mode, the sterilizer display remains dark and the
sterilizer chamber is not heated to save energy. If the sterilizer is not
used for three hours, it automatically switches to Standby mode.
ENTER THE STANDBY MODE MANUALLY
Homepage
1
Tap
.
2
Lexa PLUS | Instructions for Use | RIS-311 ENG Rev03 | 29/08/2022 | © W&H Sterilization Srl
>
>
EXIT THE STANDBY MODE
Tap
or open or close the chamber door.
CHANGING STANDBY MODE DELAY TIME
On the homepage, tap
1
Tap
or
to change the delay time.
2
Tap
to confirm.
3
>
>
Getting started
37