Traceability Options (Optional) - W&H Lexa PLUS Instructions For Use Manual

DELETE A USER
On the homepage, tap
1
Tap your user name.
2
Enter the PIN and tap
3
Tap .
4
Tap the user name you want to delete.
5
Tap to confirm.
6
RESET A USER PIN
On the homepage, tap
1
Tap your user name.
2
Enter the PIN and tap
3
Tap and the user name for which you want to reset the PIN.
4
Tap to confirm: the PIN is set to "0000" and a confirmation
5
message appears.
Tap to return to the homepage.
6
Note: Remember the user to change their PIN before reusing the sterilizer.
Lexa PLUS | Instructions for Use | RIS-311 ENG Rev03 | 29/08/2022 | © W&H Sterilization Srl
> >
to confirm.
> >
to confirm.

Traceability options (optional)

FUNCTION AVAILABILITY
To access the user management functions a special code must be
entered. The special code is required only at the first access to the
Options ( ) menus: after the code was entered, the function is
enabled and there is no need to enter the code again.
If you want to disable the function another special code must be
entered.
Note: for more information contact your dealer.
WHO CAN SET THE TRACEABILITY OPTIONS
Only a user with administrator rights can set the traceability options.
SET THE TRACEABILITY OPTIONS
On the homepage, tap
1
Tap your user name.
2
Enter your PIN and tap
3
Tap the information to be requested to the users at the
4
beginning and at the end of the cycle.
If you want the user to check the load and release it as valid at
5
the end of the cycle, tap
Tap to confirm and go back to the previous page.
6
> >
to confirm.
.
Administrator
39