1200-cycle or yearly maintenance
REPLACING THE DOOR GASKET
Notice: The door gasket needs to be replaced every 1200 sterilization cycles or once a year, whichever come first. A replacement message alerts
when replacement is due. If the consumables is replaced prior to the message, you have to reset the consumable cycle counter.
Proceed as follows:
Open the chamber door.
1
Remove the used door gasket by hand.
2
Carefully clean the seal seat and the inside face of the chamber door.
3
Lexa PLUS | Instructions for Use | RIS-311 ENG Rev03 | 29/08/2022 | © W&H Sterilization Srl
Maintenance
73