Table Of Contents - Primedic HeartSave Operating Instructions Manual

Table of contents

1 Introduction HeartSave AED Trainer
1.1 Foreword
1.2 Validity
1.3 Intended use
1.4 Guarantee
1.5 Disclaimers
2 Description of device
2.1 Description of device details
2.2 Description of the accessories
2.2.1 SavePads Trainer Electrodes
2.2.2 SavePads Trainer Cable
2.2.3 Accessories
3 Preparatory measures before (initial) start-up
3.1 Unpacking
3.2 Inserting / Replacing the Batteries in the Power Module
3.3 Inserting / replacing the energy module
3.3.1 Inserting the power module
3.3.2 Removing the power module from the device
3.4 Inserting / replacing the SD card
3.5 Entering the Device Code for Remote Control
4 Using the device
4.1 Enable / Disable the PRIMEDIC™ HeartSave AED Trainer
4.1.1 Turn on the PRIMEDIC™ HeartSave AED Trainer
4.1.2 Turn off the PRIMEDIC™ HeartSave AED Trainer
4.2 Resuscitation Sequence
4.2.1 Selection of Resuscitation-Scenarios
4.2.2 Pediatric Mode
4.2.3 Conditions for the Start of the Analysis
4.2.4 Automatic start of analysis
4.2.5 Adapting the volume of the metronome
5 ERC/AHA Guideline 2010
5.1 Voice output of the device
5.1.1 Defibrillation necessary:
5.1.2 Defibrillation is not necessary:
5.2 Cardio pulmonary resuscitation
5.3 Message < Check electrodes >
6 Cleaning
7 Disposal
8 Technical Data
9 Warranty conditions
The PRIMEDIC™ HeartSave AED
!
Trainer is no active defibrillator and is
therefore not suitable for the therapy to
patients.
Table of contents
4
4
4
4
4
5
6
6
9
9
9
10
11
11
11
12
12
13
13
14
15
15
15
15
15
15
17
18
18
18
19
19
19
19
20
20
21
21
22
23
!
III