Start-Up And Operation; Maintenance - KEB COMBIVERT F6 Instructions For Use Manual

Hide thumbs Also See for COMBIVERT F6:

Table of Contents

2.2 Start-up and operation

WARNUNG

2.3 Maintenance

ma_dr_f6-cu-p-inst-20182705_en

The start-up (i.e. the starting of normal operation) is prohibited until the machinery

has been proved to conform to the provisions

2014/30/EU;

EN 60204-1

Wrong parameterization

Unintentional behaviour of the drive

ü During initial start-up or replacement of the drive controller

a) Secure motors against automatic restart.

b) Check whether the appropriate parameter list for the application has been im-

ported.

Software protection functions as sole protection.

Protection function in case of software problems without function.

ü Securing a unit solely with software-supported functions is not sufficient.

a) Install external protective measures (e.g. limit switch) that are independent of

the drive controller.

General Safety Instructions | 2

Directive 2006/42/EG

must be observed.

and

Directive

Table of Contents