Windshield Washers - Ford RANGER 2016 Owner's Manual

Use the rotary control to adjust the
sensitivity of the autowipers. When you
select low sensitivity, the wipers will
operate when the sensor detects a large
amount of water on the windshield. When
you select high sensitivity, the wipers will
operate when the sensor detects a small
amount of water on the windshield.
Keep the outside of the windshield clean.
The rain sensor is very sensitive and the
wipers may operate if dirt, mist or insects
hit the windshield.

WINDSHIELD WASHERS

Type 1
Note: Operating this function with the
engine off will drain the battery.
E131460
Note: Do not operate the washers when
the washer reservoir is empty.
Pull the lever toward you to operate the
windshield washers. The wiper will be
activated within a second.
In order to reduce water usage, the washer
is functioned to stop after operating
continuously for 10 seconds. Pull the lever
toward you to operate the windshield
washers.
Ranger (TKE) Vehicles Built From: 02-05-2016 Vehicles Built Up To: 04-09-2016, EB3B-19G219-AKC enGBR, First Printing
Wipers and Washers
Type 2
Note: Operating this function with the
engine off will drain the battery.
Note: Do not operate the washers when
the washer reservoir is empty. This may
cause the washer pump to overheat.
E222247
Note: Do not operate the washers when
the washer reservoir is empty.
Pull the lever toward you to operate the
windshield washers. The wiper will be
activated within a second.
In order to reduce water usage, the washer
is functioned to stop after operating
continuously for 10 seconds. Pull the lever
toward you to operate the windshield
washers.
50