Cigar Lighter - Ford RANGER 2016 Owner's Manual

Hide thumbs Also See for RANGER 2016:
Table of Contents

Advertisement

E206133
You can use the power point for powering
electrical devices that require up to 150
watts. It is on the rear of the center
console.
The power point indicator light, located on
the power point, shows when the power
point is ready for use.
When the power point indicator light is:
On — the power point is ready to supply
power.
Off — the power point power supply is
off and so is the ignition.
Flashing — the power point is in fault
mode, or the battery voltage is to low.
The power outlet temporarily turns off
power when in fault mode if the device
exceeds the 150 watt limit. Unplug your
device and switch the ignition off. Switch
the ignition back on, but do not plug your
device back in. Let the system cool off and
switch the ignition off to reset the fault
mode. Switch the ignition back on and
make sure the indicator light remains on.
Do not use the power point for certain
electric devices, including:
Cathode-ray, tube-type televisions.
Motor loads, such as vacuum cleaners,
electric saws and other electric power
tools or compressor-driven
refrigerators.
Ranger (TKE) Vehicles Built From: 02-05-2016 Vehicles Built Up To: 04-09-2016, EB3B-19G219-AKC enGBR, First Printing
Auxiliary Power Points
111
Measuring devices, which process
precise data, such as medical
equipment or measuring equipment.
Other appliances requiring an
extremely stable power supply such as
microcomputer-controlled electric
blankets or touch-sensor lamps.

CIGAR LIGHTER

WARNING
Do not plug optional electrical
accessories into the cigar lighter
socket. Incorrect use of the cigar
lighter can cause damage not covered by
the vehicle warranty, and can result in fire
or serious injury.
Note: Do not hold the cigar lighter element
pressed in.
Note: If the power supply does not work
after you switch the ignition off, switch the
ignition on.
Note: If you use the socket when the engine
is not running, the battery may lose charge.
Note: When you switch the ignition on, you
can use the socket to power 12 volt
appliances with a maximum current rating
of 15 amps.
E103382

Advertisement

Table of Contents
loading

Table of Contents