Table of Contents
Advertisement
E134692
Removing a Road Wheel
WARNINGS
Park your vehicle so that you do not
obstruct the flow of traffic or place
yourself in any danger and set up a
warning triangle.
Make sure that your vehicle is on firm
and level ground with the front
wheels pointing straight ahead.
Switch the ignition off and apply the
parking brake.
If your vehicle has a manual
transmission, shift into first or reverse
gear. If your vehicle has an automatic
transmission, shift into park (P).
Make sure all passengers are out of
your vehicle.
Chock the diagonally opposite wheel
to the punctured tire with an
appropriate block or wheel chock.
Do not work on your vehicle when
the jack is the only support. If the
vehicle slips off the jack, you or
someone else could be seriously injured.
Ranger (TKE) Vehicles Built From: 02-05-2016 Vehicles Built Up To: 04-09-2016, EB3B-19G219-AKC enGBR, First Printing
Wheels and Tires
Note: Do not lay alloy road wheels face
down on the ground.
E79153
1.
Note: Assemble the three handles to jack
the rear of the vehicle.
2. Loosen the lug nuts.
3. Raise your vehicle until the tire is clear
E134693
4. Remove the lug nuts and the road
284
WARNINGS
Make sure that the vehicle jack is
vertical to the jacking point and the
base is flat on the ground.
1
3
Assemble the jack handle.
of the ground.
wheel.
2
Advertisement
Table of Contents
Troubleshooting
