Table of Contents
Advertisement
The radar sensor cover in the grille is dirty
or obstructed
The surface of the radar sensor cover is
clean but the message remains in the
display
Heavy rain, spray, snow or fog in the air
interferes with the radar signals
Swirling water, snow or ice on the road
surface interferes with the radar signals
System Limitations
WARNING
The Pre-Collision Assist system's
brake support reduces collision
speed only if you brake your vehicle
before any collision. You must press your
brake pedal as you would in any typical
braking situation.
Due to the nature of radar technology,
there may be certain instances where
vehicles do not provide a collision warning.
These include:
•
Stationary vehicles or slow moving
vehicles.
•
Pedestrians or objects in the roadway.
•
Oncoming vehicles in the same lane.
•
Severe weather conditions (see
blocked sensor section).
•
Debris build-up on the grille near the
headlamps (see blocked sensor
section).
Ranger (TKE) Vehicles Built From: 02-05-2016 Vehicles Built Up To: 04-09-2016, EB3B-19G219-AKC enGBR, First Printing
Driving Aids
Cause
Clean the radar sensor cover or remove the
obstruction
Wait a short time. The radar may take
several minutes to reset after you remove
the obstruction
The Pre-Collision Assist system is tempor-
arily disabled. Shortly after weather condi-
tions improve, the collision warning system
automatically reactivates
The Pre-Collision Assist system is tempor-
arily disabled. Shortly after weather condi-
tions improve, the collision warning system
automatically reactivates
•
Small distance to vehicle ahead.
•
Large steering wheel and pedal
movements (very active driving style).
Damage to the front end of your vehicle
may alter the radar sensor's coverage area.
This may result in missed or false collision
warnings. Have an authorized dealer check
your radar sensor for proper coverage and
operation.
176
Action
Advertisement
Table of Contents
Troubleshooting
