Table of Contents
Advertisement
The selection menu expands and different
options appear.
•
Press the up and down arrows to scroll
through the modes.
•
Press the right arrow to enter the mode.
•
Press the left or right arrows to make
adjustments within the chosen mode.
•
Press OK to confirm your selection.
Note: If your vehicle is not equipped with
Navigation, Compass appears in the display
instead of Navigation. If you press the right
arrow to go into the Compass menu, you
can see the compass graphic. The compass
displays the direction in which the vehicle
is traveling, not true direction (for example,
if the vehicle is traveling west, the middle
of the compass graphic displays west; north
displays to the left of west though its true
direction is to the right of west).
Using Voice Recognition
This system helps you control many
features using voice commands. This
allows you to keep your hands on the
wheel and focus on what is in front of you.
The system provides feedback through
audible tones, prompts, questions and
spoken confirmations depending on the
situation and the chosen level of
interaction (voice settings).
The system also asks short questions
(confirmation prompts) when it is not sure
of your request or when there are multiple
possible responses to your request.
When using voice commands, words and
icons may appear in the lower left status
bar indicating the status of the voice
command session.
How to Use Voice Commands
The following are some of the
voice commands that you can
say at any time during a voice
E142599
command session.
Ranger (TKE) Vehicles Built From: 02-05-2016 Vehicles Built Up To: 04-09-2016, EB3B-19G219-AKC enGBR, First Printing
SYNC
2
(If Equipped)
Press the voice button and when
prompted say:
Main Menu
What Can I Say
Previous Page
Go back
Help
Helpful Hints
•
•
•
•
Accessing a List of Available Voice
Commands
To access a list of available voice
commands you can do either of the
following.
Using the touchscreen, press:
Settings
Help
Voice Command List
400
Voice command
Make sure the interior of your vehicle is
as quiet as possible. Wind noise from
open windows and road vibrations may
prevent the system from correctly
recognizing spoken voice commands.
After pressing the voice command icon,
wait until after the tone sounds and a
message appears before saying a voice
command. Any voice command spoken
prior to this does not register with the
system.
Speak naturally, without long pauses
between words.
At any time, you can interrupt the
system while it is speaking by pressing
the voice command icon.
Menu Item
Advertisement
Table of Contents
Troubleshooting
