Windshield Washers - Ford ECOSPORT 2016 Owner's Manual

Note: During wet or winter driving
conditions with ice, snow or a salty road
mist, inconsistent or unexpected wiping or
smearing may occur.
In these conditions, you can do the
following:
Lower the sensitivity of the autowipers
to reduce the amount of smearing.
Switch to normal or high-speed wipe.
Switch the autowipers off.
E102033
A High sensitivity
B On
C Low sensitivity
Note: The lever arrangement is mirrored in
right-hand drive vehicles.
The rain sensor monitors the amount of
moisture on the windshield and
automatically turns on the wipers. It will
adjust the wiper speed by the amount of
moisture that the sensor detects on the
windshield.
Use the rotary control to adjust the
sensitivity of the rain sensor. Set the
control to low sensitivity, and the wipers
will turn on when the rain sensor detects
a large amount of moisture on the
windshield. Set the control to high
sensitivity, and the wipers will turn on when
the rain sensor detects a small amount of
moisture on the windshield.
Ecosport (CBY) Thailand, enTHA
Wipers and Washers
Keep the outside of the windshield clean
because the rain sensor is very sensitive. If
the area around the interior mirror is dirty,
then the wipers may turn on, for example,
if dirt, mist or insects hit the windshield.
You can switch this feature on and off
through the information display. See Trip
Computer (page 9).

WINDSHIELD WASHERS

A
B
E102051
Push the button to operate the washers.
C
When you release the button, the wipers
will operate for a short time.
Note: The lever arrangement is mirrored in
right-hand drive vehicles.
Note: Do not operate the washers when
the washer reservoir is empty. This may
cause the washer pump to overheat.
5
(G1822877)
(G1822877)