Windshield Washers - Ford MUSTANG 2022 Owner's Manual

The feature uses a rain sensor that is in the
area around the interior mirror. The rain
sensor monitors the amount of moisture
on the windshield and turns on the wipers.
It adjusts the wiper speed by the amount
of moisture that the sensor detects on the
windshield. You can switch this feature on
and off in the information display. See
Information Displays (page 99).
E173730
A Highest sensitivity.
B On.
C Lowest sensitivity.
Use the rotary control to adjust the
sensitivity of the autowipers. When you
select low sensitivity, the wipers operate
when the sensor detects a large amount
of water on the windshield. When you
select high sensitivity, the wipers operate
when the sensor detects a small amount
of water on the windshield.
Keep the outside of the windshield clean.
The rain sensor is very sensitive and the
wipers may operate if dirt, mist or insects
hit the windshield.
2022 Mustang (CZG) Canada/United States of America, Vehicles Built From: 27-09-2021, enUSA, Edition date: 202110, First-Printing
Wipers and Washers
In these conditions, you can do the
following:
•
•
•

WINDSHIELD WASHERS

Note: Do not operate the washers when
the washer reservoir is empty. This may
cause the washer pump to overheat.
E173731
To operate the washers and spray the
windshield, pull the lever toward you.
79
Lower the sensitivity of the autowipers
to reduce the amount of smearing on
the windshield.
Switch to normal or high-speed wipe.
Switch autowipers off.