Ford RANGER 2016 Owner's Manual page 279

Hide thumbs Also See for RANGER 2016:
Table of Contents

Advertisement

malfunction, the warning lamp will flash
for approximately one minute and then
remain illuminated. This sequence will
occur every time you switch the ignition on
while the malfunction remains. The system
has detected a fault that requires service.
When the malfunction indicator is
illuminated, the system may not be able
to detect or signal low tire pressures. A
malfunction may occur for a variety of
reasons, including the installation of a
replacement tire or wheel that prevents
the system from functioning correctly.
Always check the tire pressure monitoring
system malfunction warning after
replacing one or more tires or wheels on
your vehicle. Make sure the replacement
tires or wheels allow the system to
continue to function correctly. See When
the Temporary Spare Tire is Installed
in this section.
How Temperature Affects the Tire
Pressures
Under normal driving conditions tire
pressures may increase by up to 0.3 bar
(4.4 psi) from a cold start situation.
If the vehicle is stationary overnight and
the temperature is significantly lower than
the daytime temperature, tire pressures
may decrease by up to 0.2 bar (2.9 psi)
when there is a drop in the ambient
temperature of 17°C (62.6°F) or more. The
system detects this pressure decrease as
being significantly below the correct
inflation pressure and the warning lamp
illuminates.
Ranger (TKE) Vehicles Built From: 02-05-2016 Vehicles Built Up To: 04-09-2016, EB3B-19G219-AKC enGBR, First Printing
Wheels and Tires
Changing Tires With a Tire
Pressure Monitoring System
E142549
You should always have tires serviced by
an authorized dealer.
Note: Each road wheel and tire is fitted with
a tire pressure sensor located inside the
wheel and tire assembly cavity. The pressure
sensor attaches to the valve stem. The tire
covers the pressure sensor and it is not
visible unless the tire is removed. Take care
when changing the tire to avoid damaging
the sensor.
Understanding the Tire Pressure
Monitoring System
You must maintain the correct tire
pressures, even if low tire pressure has not
illuminated the warning lamp.
The system measures the pressure in the
road tires and displays a warning lamp in
the instrument cluster when a low pressure
is detected. See Warning Lamps and
Indicators (page 66).
The system detects this lower pressure as
being significantly below the correct
inflation pressure and the warning lamp
illuminates.
276

Advertisement

Table of Contents
loading

Table of Contents