Ford RANGER 2016 Owner's Manual page 339

Speak naturally, without long pauses
between words.
You can interrupt the system at any time
while it is speaking by pressing the voice
button. You can also cancel a voice session
at any time by pressing and holding the
voice button.
Using Ford Audio with Your Phone
Hands-free calling is one of the main
features of Ford Audio.
At a minimum, most cell phones with
Bluetooth wireless technology support the
following functions:
• Answering an incoming call.
• Ending a call.
• Using privacy mode.
• Dialing a number.
• Redialing.
• Call waiting notification.
• Caller ID.
Other features such as using Bluetooth
audio and automatic phonebook download
are cell phone dependent features. To
check your cell phone's compatibility, refer
to your device's manual or visit the regional
Ford website.
Pairing a Cell Phone For the First Time
Wirelessly pairing your cell phone with the
system allows you to make and receive
hands-free calls.
Note: You must switch radio on.
1. Make sure the Bluetooth feature on
your cell phone is switched on before
starting the search. Refer to your
device's manual if necessary.
2. Press the PHONE button then scroll
to BLUETOOTH devices then press
the OK button. When the audio display
indicates that no phones are paired,
select the option to add.
Ranger (TKE) Vehicles Built From: 02-05-2016 Vehicles Built Up To: 04-09-2016, EB3B-19G219-AKC enGBR, First Printing
Audio System
3. When a message to begin pairing
appears in the audio display, search for
Ford audio on your cell phone to start
the pairing process.
4. Select Ford audio on your cell phone.
5. Wait until the PIN appears on the
phone display. Compare the PIN on the
phone with the PIN shown in the audio
display and accept the request on the
phone and the vehicle display. The
display indicates when the pairing is
successful.
Note: In some cases the phone will request
to enter a PIN. Enter the four-digit PIN
provided by the system in the audio display.
The display indicates when the pairing is
successful.
Depending on your cell phone's capability
and your market, the system may prompt
you with questions such as setting the
current cell phone as the primary cell
phone (the cell phone the system
automatically tries to connect with first
when you switch the ignition on) or
downloading your phonebook.
Pairing Subsequent Cell Phones
Wirelessly pairing your cell phone with the
system allows you to make and receive
hands-free calls.
Note: You must switch the ignition and
radio on.
Note: To scroll through the menus, press
the up or down arrows on your audio system.
1. Make sure the Bluetooth feature on
your cell phone is switched on before
starting the search. Refer to your
device's manual if necessary.
2. Press the PHONE button.
3. Select the option for Bluetooth devices.
336
The information display may
show your cell phone's battery
charge level and signal strength.