Table of Contents
Advertisement
13.56 MHz Card Reader Module Configuration
•
Module Name – set the module name for card reader logging purposes.
•
Door – set the reader direction (Door Entry, Door Exit) for the Attendance system
purposes.
•
Associated Switch – set the switch to be activated after user authentication via this
module. If you set Door Lock Switch, the authentication rules specified in Hardware / Door
will be used.
•
Allowed Card Types – set the type of a card to be accepted by the card reader. The card
reader supports just one card type at an instant.
•
Samsung NFC Compatibility – enable NFC compatibility with the Samsung phones.
•
Forward to Wiegand Output – set a group of Wiegand outputs to which all the received
RFID card IDs will be resen
Tip
•
To accelerate card reading, you are recommended to select the card types used by
the user in the module settings.
2N® LTE Verso Configuration Manual
94 / 224
Advertisement
Table of Contents
