Table of Contents
Advertisement
Main Unit Module Configuration
•
Output 1 maximum power – set the maximum load to be connected to the power output
available on the basic unit. When the output is active, the consumption of the other
modules (backlight level, etc.) can be adjusted automatically in order that the maximum
allowed consumption of the intercom cannot be exceeded.
•
Locate device – optical and acoustic signalling of a device. Note: Optical signalling is
possible only if the device is equipped with control backlight (Verso, Base, Vario, Force,
Safety and Uni). If a speaker is not integrated in the device, make sure than an external
speaker is connected (Audio Kit and Video Kit) to use sound signalling.
2N® LTE Verso Configuration Manual
89 / 224
Advertisement
Table of Contents
