Table of Contents
Advertisement
Caution
•
In case the user authenticates itself and activates the silent alarm that is
deactivated, the user access will be denied and the alarm will not be activated.
•
Limit Failed Access Attempts – enable the maximum count of unsuccessful
authentication attempts. After five unsuccessful attempts (wrong numeric code, invalid
card, etc.), the access module will be blocked for 30 seconds even if authentication is
valid.
•
License Plate Recognition – choose the scenario after the license plate is recognized.
Refer to the manual for function details. Refer to Subs.
Warning
•
The software factory reset or different configuration upload does not result in a
change of the access blocking setting. It is only the hardware factory reset using
the Reset button on the device that resets the default values.
•
The Security Relay enhances the installation security against hardware reset
misuse.
The plus/minus cards are used for user card administration. When a plus card is tapped on the
card reader, any other tapped card is added to the Directory list as a new user with an access
card assigned. The user !Visitor #card_ID is automatically created in the device. When a minus
card is tapped on the card reader, any other tapped card and its user are deleted from the
Directory list.
•
Plus Card ID – enter the service card ID for adding cards to the Installed cards: a sequence
of 6 to 32 characters including 0–9, A–F.
•
Minus Card ID – enter the service card ID for removing cards from the Installed cards: a
sequence of 6 to 32 characters including 0–9, A–F.
2N® LTE Verso Configuration Manual
5.2.1
Uživatelé for function details.
132 / 224
Advertisement
Table of Contents
