Table of Contents
Advertisement
•
Time profile – assign a time profile to each phone number to define the number validity. If
the profile in inactive, the phone number is not used and the following phone number is
dialled if defined.
•
IP Eye address – set the address of the PC to be sent a special UDP message on each
active user phone number call. With the aid of this message, the 2N
displays the camera image screen for those users who are not provided with a display-
equipped videophone. Enter the address as follows: domain[:port1][:port2], e.g.:
computer.yourcompany.com
optional and are used in case there is Network Address Translation (NAT) between the PC
and intercom and the addresses have to comply with the router or another NAT-executing
device. The port1 (default value: 8003) parameter defines the destination port for the UDP
messages sent to 2N
destination port for the 2N
Note
The 'IP Eye Address' function is available in selected 2N LTE intercom models only (refer to
the model and licence overview).
When Enhanced Integration is not licensed on a device, it is possible to control the locks
only when a call is in progress. If a call with user, who has 2N
progress, no licence is needed to control the locks.
Tip
®
FAQ:
2N
IP Eye – How to set
Tip
Video
Tutorial: SW application for IP/LTE intercoms – 2N
•
Parallel call to following number – enable group calling, i.e. calling to more phone
numbers at the same time. You can call the first two numbers, the last two numbers, or all
of the three user numbers in parallel. Answering one call automatically terminates the
other calls.
•
Parallel call to following deputy – enable group calling, i.e. calling to more phone
numbers at the same time. You can call the firs two numbers, the last two numbers, ar all
of three user numbers in parallel. Once one of the calls is answered, the other calls are
automatically terminated.The maximum total count of numbers to be dialled in parallel is
16, which can occur when group calling and multiple numbers assigned to a speed dial
button are used
•
User deputy – select a user to which the user calls will be routed in the event of
inaccessibility. Enter user position number or use search
or 192.168.22.111. The port1 and port2 parameters are
®
IP Eye. The port2 (default value: 80) parameter defines the
®
IP Eye – intercom HTTP communication.
simultaneously.
2N® LTE Verso Configuration Manual
®
IP Eye application
®
IP Eye address filled in, is in
®
IP Eye
button. The maximum total
37 / 224
Advertisement
Table of Contents
