Table of Contents
Advertisement
•
Enable Crestron Network Discovery – enable 2N IP intercom identification within the
Crestron network.
•
Crestron Device Name – select the device name.
•
Crestron Group List – select the group name list with comma as a separator.
•
Enable Video Multicast for Crestron panels – enable video multicast for Crestron panels,
allowing for multiple Crestron devices to receive the same video stream without wasting
the local network bandwidth.
•
Crestron Multicast Address – set the multicast address to be used for multicast video for
Crestron devices.
•
Crestron Multicast Port – set the multicast port to be used for multicast video for
Crestron devices.
•
Crestron Multicast TTL – set the Time To Live (TTL) value to be used for sending video
early media for Crestron devices.
2N® LTE Verso Configuration Manual
117 / 224
Advertisement
Table of Contents
