Having been read, the card ID is compared with the intercom card database. If the card ID
matches any of the cards in the database, the appropriate action will be executed: switch
activation (door unlocking, etc.). To change the switch number to be activated, use
the Associated Switch parameter in the Hardware / Modules menu of the card reader module
®
(2N
LTE Verso model).
Use the Hardware / Buttons menu to assign the quick dial users. By default, button 1 is
assigned to position 1 in the user list, button 2 to position 2 in the phone book, etc. You can
change the user and button settings as necessary. Most of the 2N LTE intercoms are equipped
with one or more quick dial buttons. Refer to the Installation Manual of your intercom model for
the quick dial button count and extending options.
Warning
•
You are not advised to edit the device directory that is managed by 2N
Commander via the device web interface. Due to synchronization with 2N
Commander the directory changes made via the web interface will be lost.
The Search in directory function works as a fulltext search in user names, phone numbers and e-
mail addresses. It searches for all matches in the list. The
and add them to the Directory list if necessary. Click
the user details. Click
user name, e-mail and assigned accesses. Press
user's position in the list is sorted
Every record in the Users list includes the following parameters:
to set the table column display; the default table setting displays the
icons in the access column describe the active user authentications. The
alphabetically.
2N® LTE Verso Configuration Manual
icon helps find registered devices
to create a new user and
to remove a user and delete its details. The
®
Access
®
Access
to show
33 / 224