About This Manual; Validity; Applicable Documents; Variants - Pfeiffer Vacuum QMA 4X0 Operating Instructions Manual

About this manual

1 About this manual
1.1 Validity
This document describes the function of the products listed in the following and provides the most im-
portant information for safe use. The description is written in accordance with the valid directives. The
information in this document refers to the current development status of the products. The document
retains its validity assuming that the customer does not make any changes to the product.
1.1.1 Applicable documents
Designation
Operating instructions for "HiQuad" QMG 700
Operating instructions for EP 422 electrometer pre-amplifier
Operating instructions for CP 400 ion counter pre-amplifier
Operating instructions for IO 720 input-output module
Operating instructions for QMH 4x0-x high-frequency generator
QUADERA software documentation
Declaration of conformity
Tbl. 1:
You can find these documents in the
1.1.2 Variants
This document applies to products with the following article numbers:
Article number
PT M07 xxx
PT M08 xxx
PT M09 xxx
You can find the part number on the rating plate of the product.
Pfeiffer Vacuum reserves the right to make technical changes without prior notification.
The figures in this document are not to scale.
Dimensions are in mm unless stated otherwise.
1.2 Target group
These operating instructions are aimed at all persons performing the following activities on the product:
● Transportation
● Setup (Installation)
● Usage and operation
● Decommissioning
● Maintenance and cleaning
● Storage or disposal
The work described in this document is only permitted to be performed by persons with the appropriate
technical qualifications (expert personnel) or who have received the relevant training from Pfeiffer Vac-
uum.
8/52
IMPORTANT
Read carefully before use.
Keep the manual for future consultation.

Applicable documents

Pfeiffer Vacuum Download
Designation
QMA 400
QMA 410
QMA 430
Document
BG 5400
BG 5812
BG 5402
BG 5982
A component of the software
A component of these instructions
Center.