Installation
5.4
Installing the hydraulic unit
A suitable location for the hydraulic unit is on the
wheel housing. The unit is ideally secured with the
supplied bracket.
The hydraulic unit can be installed horizontally or
vertically.
NOTE!
Replace transport plug with regular tank cap before
removing plugs in A and B.
5.4.1
Connection of hydraulic hoses to
hydraulic unit
Return side tilt cylinder (A), Pressure side lift/tilt
cylinder (B).
5.5
Installation of license plate light
Connect the license plate light to the vehicles ordinary lights cabeling.
Follow the manufacturer's recommendations.
Vehicle lighting
16
License plate light
Fig 18. Example of connecting the license plate light
Fig 17. Return side tilt cylinder (A),
Pressure side lift/tilt cylinder (B).
GND
(+)12V
2A
ZHZ 500/600-850
www.zepro.com