Technical Data - Inta IT1007CP Nstallation And Maintenance Instructions

Technical Data

This Intatherm thermostatic mixer tap is suitable for installations on all types of plumbing
system, including gravity supplies, fully pumped, modulating combination boiler, unvented
water heater and unbalanced supplies i.e. Cold Mains & Tank Fed Hot. They are not
suitable for non-modulating combination boilers.
Max Inlet Pressure (Static)
Max Inlet Pressure (Dynamic)
Max Inlet Temperature
Pre Set Factory Temp Setting
with Max Temperature Stop
Min Operating Pressure (Dynamic) 0.2 bar
Temperature Stability
Dimensions
Ø49.5
© Intatec Ltd 2022
10 bar Max Unbalanced Pressure Ratio
5 bar with flow regulator
85˚C Max Unbalanced Pressure Ratio
without flow regulator
43˚C Min Temp Differential between
hot inlet and mixed water outlet
± 2˚C
to achieve cold water fail safe
RED dot
BLUE dot
3
83.2
101
15:1
5:1
10˚C