Charging The Carry Case - FCS Soundsens i User Manual

Table of Contents

Advertisement

SoundSens User Guide
Leak Localisation and correlation

Charging the Carry Case

The carry case contains rechargeable batteries. It must be charged for 24 hours before
first use. Re-charge the carry case when the battery status LED starts to flash RED. The
data will be lost if the unit goes completely flat. However the battery low LED will give
plenty of notice of a low battery (i.e. days) and should be seen as an indication to
download data and re-charge.
The charge in the carry case battery pack should last approximately two months
depending on how frequently it is used.
To charge the batteries plug the supplied mains charger into the charging socket next to
the battery status LED. While charging the LED will flash ORANGE.
When the batteries are charged the battery status LED will flash GREEN (even if the
charger is still connected).
SoundSens User Guide
©Radcom (Technologies) Ltd
Page 6 of 63

Advertisement

Table of Contents
loading

Table of Contents