FCS Soundsens i User Manual page 24

For the last setting, 'number of recordings', if a value is selected that uses more than the
available memory in the logger then exclamation marks will be shown as a warning. For
example if the recoding length is set to 60 seconds and the number of recordings is set to
4 then the display will show:
The exclamation marks show that the logger memory will overflow if this combination of
settings is used. In this situation, use a lower number of recordings or a shorted recording
time.
If the loggers contain any data then it will be downloaded before the new recording is set
up. This ensures that the data in the loggers cannot be lost accidentally by setting up a
new recording. All recordings will be available for download in the SoundSens software.
SoundSens User Guide
Leak Localisation and correlation
NUMBER OF
RECORDINGS:4 !!
SoundSens User Guide
©Radcom (Technologies) Ltd Page 24 of 63