Adding Connecting Pipe Work To The Map - FCS Soundsens i User Manual

Adding connecting pipe work to the map

After dragging and dropping the loggers onto the pipe layout area and adding the join
points you can start adding the connecting pipes.
Click the pipe icon once and then move the mouse pointer over one of the loggers. Click
and hold the mouse button down over the first logger and then move the mouse to the
logger you wish to connect it to.
SoundSens User Guide
Leak Localisation and correlation
Selecting a material from the drop down list
will set a sound velocity. Un-tick "Select from
materials database" to enter your own sound
velocity.
.
SoundSens User Guide
©Radcom (Technologies) Ltd
Enter the pipe length
Select the pipe diameter
from the drop down menu
Click OK
Page 37 of 63