Table of Contents
Advertisement
The Bmic in use
Battery Warning
The Bmic contains a Nickel Metal Hydride battery which must not be used on any other
equipment if removed. Only batteries supplied by Halma Water Management must be used
as replacements.
Do not short circuit or misuse these batteries as this may result in
explosion or fire.
Battery Replacement
Although the battery is rechargeable it may eventually need to be replaced. To do this
undo the four screws underneath the hand-held unit and separate the two halves of the
Bmic unit. Gently pull out the battery holder and replace the battery. When refitting the
battery and battery holder make sure no wires become trapped.
Charging the BMIC
Connect the charger lead to the headphone connector of the Bmic and connect the charger
power lead to the universal 110-240V AC supply.
overnight. An optional accessory is the vehicle cigarette lighter adapter that can also be
used to charge the battery.
The Bmic can then be charged
4
Advertisement
Table of Contents
