Set Time / Date; Recording Options - FCS Soundsens i User Manual

Set Time / Date

Setting the time is rarely necessary as the unit contains an accurate clock, and when
connected to a PC the time and date are updated.
1. Press MODIFY to cycle through the menu options until you see "Set Time / Date"
2. Press OK to enter edit mode
3. Use the MODIFY key to change the value
4. Press OK to move to the next value

Recording options

There are three options for setting up a new recording.
1. Daytime Quick Recording
2. Overnight Quick Recording
3. Custom Recording
This table should assist you in deciding weather one of the pre-programmed sessions will
be suitable, or if you need to set up a custom recording.
Pipe
Up to 6" Metal
8" +Metal
Up to 6" AC
8"+ AC
Up to 4"MDPE?PVC
4" + MDPE/PVC
300+Steel
SoundSens User Guide
Leak Localisation and correlation
Short distances Metre
10 Seconds 500
20 Seconds 400
10 Seconds 100
20 Seconds 80
30 Seconds 50
60 Seconds 50
SoundSens User Guide
©Radcom (Technologies) Ltd
Long distances Metre
10-20 Seconds 1000
20-30 Seconds 800
20 Seconds 500
30 Seconds 500
60 Seconds 100
120+Seconds 100
20 Seconds 500
Very long
distances
60 Seconds 1000+
Page 20 of 63