Table of Contents
Advertisement
Black line
indicates the time
now
First light blue
space is Wait time
Dark blue lines are
recording times
SoundSens User Guide
Leak Localisation and correlation
It is possible to set a date and time for the
recording series to start
NOTE : Do not set a start time more than 36
hours in the future.
Alternativly you can set the loggers to wait for
a period of time before starting.
You can set the waiting time between 1
minute and 3 hours.
Make sure you have sufficient time to deploy
the pods before the run starts!
SoundSens User Guide
©Radcom (Technologies) Ltd
The time line shows a series of logging
sessions as dark blue lines. (SEE
DIAGRAM BELOW)
If the time line is red then check the
"Start Series At Time/Date" values are
not in the past (SEE NEXT DIAGRAM).
Page 14 of 63
Advertisement
Table of Contents
