Table of Contents
Advertisement
Information regarding connection via USB
With the software started connect the SoundSens carry case to the PC using the USB
communication cable.
On the Sensor Type drop down menu you can select the following
• Pre Production Sensor
• Production Sensor (The original SoundSens logger)
• Production Sensor II (Dark blue plastic logger)
• Production Sensor III (Otherwise known as SoundSens i)
The port drop down menu is usually picked automatically.
SoundSens User Guide
Leak Localisation and correlation
This message will appear indicating the
software has detected the case.
Click Select to continue.
SoundSens User Guide
©Radcom (Technologies) Ltd
Page 10 of 63
Advertisement
Table of Contents
