FCS Soundsens i User Manual page 46

Click the small up arrow on the bottom left of the graph to reveal the advance graph
Logger 1
Serial number
Date and time of recording
To see the correlation graph between two different loggers just change the serial numbers
shown in the drop down menus for logger 1 and logger 2, and then click Apply.
To superimpose another recording taken between the same two loggers over the existing
graph, select it from the time and date drop down menu and then click Apply.
To change the Band Pass Filter, adjust the figures and then click Apply.
SoundSens User Guide
Leak Localisation and correlation
Reveal Advanced Graph Options
options (see below)
SoundSens User Guide
©Radcom (Technologies) Ltd
Logger 2
Serial number
Page 46 of 63