Download Loggers - FCS Soundsens i User Manual

Download loggers

The loggers can be collected when the recordings have finished.
If you leave the SoundSens software running then you will see the following information to
help you tell when the recordings are being done, and when they are finished.
Note : When the loggers are put back in the case for downloading they can go back in any
order.
If any fail to communicate you
will see this error message.
SoundSens User Guide
Leak Localisation and correlation
Time shows how long until the recording
starts. The number in brackets shows how
many recordings are left to do.
When is says No Scheduled Recordings it
means all the recordings have been finished.
The SoundSens software must be left running
for this to work. If the software is stopped
then the counter will reset back to showing No
Scheduled Recordings.
With the SoundSens software running and the USB cable
connected between the laptop and the suitcase click the
Download button.
SoundSens User Guide
©Radcom (Technologies) Ltd Page 39 of 63