FCS Soundsens i User Manual page 18

After uploading the settings to the loggers the SoundSens software will look something like
this...
The next step is to create a pipe layout.
Creating a pipe layout is explained in the Pipe Layout section within the Dealing With Data
chapter of this manual.
SoundSens User Guide
Leak Localisation and correlation
This countdown timer
shows how much time
Pipe layout
is left before the logging
menu
starts
Pipe layout area
Pipe layout toolbar
REMEMBER TO SAVE REGULARLY (PAGE 8)
SoundSens User Guide
©Radcom (Technologies) Ltd
The number in
brackets shows
how many logging
sessions are left
Page 18 of 63