FCS Soundsens i User Manual page 16

Deploy SoundSens correlation pods ( i.e. loggers) on site.
You should have sufficient time to deploy the pods before the run starts.
As you deploy make a note of the SERIAL NUMBER of the Pod and it's location on site.
SoundSens User Guide
Leak Localisation and correlation
The SoundSens software will display this message if the
setup worked. Click OK to continue.
SoundSens User Guide
©Radcom (Technologies) Ltd
After you are happy with the settings in
the setup window, click OK.
The SoundSens software should
communicate with the suitcase.
CONTINUED...
Page 16 of 63