Audi TT 2007 Workshop Manual page 67

– Insert support -T40091/2- with slide -T40093/5- into the two
connecting pieces -T40093/4- .
WARNING
Accidents can be caused if parts of the support bracket are not
correctly secured.
♦ Secure support -T40091/2- using retaining pins and split
pins of the connecting pieces -T40093/4- .
♦ Secure connecting pieces and supports using clamping
bolts.
– Attach hook -10 - 222 A /10- to slide and to engine lifting eye.
– Take up weight of engine/gearbox assembly via the spindle,
but do not raise.
– Unscrew bolts -arrows-.
– Open retainers for wiring duct -arrows-.
– Cut open cable tie -1- and push electrical wiring to one side.
– Unclip wiring duct.
Direct shift gearbox 02E, front-wheel drive - Edition 12.2006
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi TT 2007 ➤
8. Assembly mountings - exploded view
63