Audi TT 2007 Workshop Manual page 53

– Release spring-type clip -1- and hose clip -2- and remove air
intake hose leading to charge air cooler.
– Remove bolt -1- and take out intake connecting pipe from be‐
low.
Note
-Items 2, 3, 4- can be disregarded.
– Remove nuts -arrows- and move bracket with wiring towards
front of vehicle.
– Free coolant hose running from continued coolant circulation
pump -V51- to radiator.
– Unbolt heat shield for drive shaft (right-side) -arrows-.
– Unbolt drive shafts (left and right) from flange shafts on gear‐
box ⇒ Rep. Gr. 40 .
– Tie up drive shafts with cable ties.
Note
Make sure you do not damage surface coating on drive shafts.
Direct shift gearbox 02E, front-wheel drive - Edition 12.2006
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi TT 2007 ➤
49
4. Removing gearbox